03.13 EN
170
4.7
Checking the wheel attachments.
WARNING!
Using different tyres can cause accidents
The quality of tyres affects the stability and performance of the truck.
X
The diameter of the wheels must differ by no more than 15 mm.
X
Always replace tyres in pairs. After replacing the tyres check the wheel nuts are
secure after 10 service hours.
X
Always use tyres of the same make, model and profile.
Checking the wheel attachment
Requirements
– Prepare the truck for maintenance and repairs
(see "Preparing the truck for maintenance and
repairs" on page 163).
Tools and Material Required
– Torque wrench
Procedure
• Torque the wheel nuts (208) crosswise with a
torque wrench, for torques see "Tyre type" on
page 27.
The wheel attachment is now checked.
Z
When using pneumatic tyres check the air pressure, for the air pressure see "Tyre
type" on page 27
208
Summary of Contents for DFG 425s
