Jungheinrich DFG 425s, Operating Instructions Manual, Page: 117 / 229

03.13 EN
116
Error displays adding a user code
For the following events the LED (158) flashes red:
Cause Remedy
– The user code entered is not
the same length as the
master code
– Switch off the truck, see "Switching off the truck
with the keypad (CanCode)" on page 112.
– Repeat the entry, making sure that the master
code is the same length as the user code.
– New user code is already
occupied by a master code
– Switch off the truck, see "Switching off the truck
with the keypad (CanCode)" on page 112.
– Choose a different user code, see "Add
operator code" on page 115.
– The newly entered user
codes do not match
– Switch off the truck, see "Switching off the truck
with the keypad (CanCode)" on page 112.
– Add the user code again, see "Add operator
code" on page 115.
– Code log full. – Switch off the truck, see "Switching off the truck
with the keypad (CanCode)" on page 112.
– Delete individual user codes, see "Delete
individual user codes" on page 119.
– Delete all user codes, see "Delete all user
codes," on page 121.