133
03.13 EN
6.6
Panel door
CAUTION!
An open door can cause accidents (160)
X
Do not travel with an open door (160). When opening the door make sure there is
nobody in the door’s swing range.
X
Always close the door tightly and make sure it is locked.
X
Closing the door does not release the driver from his responsibility to wear a seat
belt, see "Seat Belt" on page 73.
Hazardous situations
If the truck is about to tip over, do not loosen the
seat belt. The operator must not jump off the
truck. The operator must lean his upper body
over the steering wheel and hold on with both
hands. Tilt your body in the opposite direction of
fall.
Requirements
– On trucks with a door monitoring sensor, travel
is only enabled when the panel door is closed
(
o
).
Procedure
• Pull the handle (166) towards the operator
position, the door swings open.
• Pull the door (160) towards the operator; the door closes.
6.7
Operator position extension
DANGER!
Altering the tilt resistance can be dangerous
The lateral tilt resistance reduces with a higher truck centre of gravity.
The height above the overhead guard (h
6
) increases by 300 mm, see "Dimensions"
on page 22.
X
Adapt the travel speed of the truck, in particular when cornering.
Z
For entry and exit see "Entry and exit" on page 67.
160
166
Summary of Contents for DFG 425s
