119
03.13 EN
6.1.7 Delete individual user codes
Requirements
– To prepare the truck for operation, see "Preparing
the truck for operation with the keypad (CanCode)"
on page 112.
Procedure
• Press the O key (159).
• Enter the valid master code with the digit keys.
When you enter the valid master code the LED
(158) flashes green.
• Enter the parameters 0-0-3 with the digit keys.
• Confirm with the SET key (157).
The LEDs (155,158) flash green.
• Enter the user code to be deleted with the digit keys.
• Confirm with the SET key (157).
The LEDs (156,158) flash green.
• Enter the user code to be deleted again with the digit keys.
• Confirm with the SET key (157).
Wait until the LED (158) flashes green. The user code is now deleted.
• Press the O key (159).
The truck is switched off and the LED (158) is lit red.
• Check that the user code has been deleted:
• Switch the truck on with the user code to be deleted, see "Preparing the truck for
operation with the keypad (CanCode)" on page 112
After entering the user code the LED (158) flashes red and the truck remains
switched off.
• Press the O key (159).
The truck remains switched off and the LED (158) is lit red.
1
2
3
4
5
6
7
8
9
0
Set
157
154 155 156
159
158
Summary of Contents for DFG 425s
