03.13 EN
88
4.11 Adjusting the forks
WARNING!
Trapping hazard
There is a trapping hazard when you
perform this operation.
X
Wear work gloves and safety shoes.
WARNING!
Unsecured and incorrectly adjusted
forks can cause accidents
Before adjusting the forks make sure the
retaining bolts (129) are fitted.
X
Adjust the forks so that both forks are
equidistant from the outside edge of the
fork carriage.
X
Engage the locking pin in a groove to
prevent the forks from moving
accidentally.
X
The load centre of gravity must be
located centrally between the forks.
Adjusting the forks
Requirements
– Park the truck securely, see "Parking the truck
securely" on page 79.
Procedure
• Lift up the locking lever (143).
• Push the forks (144) into the correct position on
the fork carriage (145).
Z
To lift the load securely, the forks (144) must be
spread as far apart as possible and positioned
centrally with respect to the fork carriage. The
load centre of gravity must be centrally aligned between the forks (144).
• Lift the locking lever down (143) and move the forks until the locking pin engages in
a slot.
The forks are now adjusted.
129
143
144
145
Summary of Contents for DFG 425s
