03.13 EN
138
6.10 Removable load backrest
CAUTION!
Trapping hazard and heavy load backrest weight
X
Wear safety gloves and safety shoes when carrying out this operation.
X
Two people are required to remove and attach the load backrest.
Load backrest disassembly
Procedure
• Loosen the screws (179).
• Remove the load backrest from the fork
carriage and put it down securely.
• Fit the fork retaining screws.
Load backrest assembly
Procedure
• Attach the load backrest to the top rail of the
fork carriage.
• Fit the bolts and tighten them with a torque wrench.
Z
Torque = 85 Nm
6.11 Lift cutout override
Z
A lift cutout device can be factory fitted when working in areas of restricted height.
This interrupts lifting.
To continue lifting:
Procedure
• Press the "lift cutout override" button (see
"Control panel with display unit" on page 58 or
see "Control panel buttons" on page 61).
• Pull the control lever (146): Lift cutout is
deactivated.
Z
Lift cutout is re-activated each time the mast
falls below the lift cutout height.
179
S
H
146
Summary of Contents for DFG 425s
