JUMO 709051, Operating Manual, Page: 69 / 92

V1.00/EN/00741192/2021-03-30 [IPC 300] 69
6 Special device functions
h
Press the key to apply the current load state as the OK state.
6.4 Setpoint specification via potentiometer
For this, a 5 k
Ω
potentiometer is connected to the voltage input.
It is supplied with DC 10 V at terminal 5 of the power controller.
h
Configuration level
r
Analog inputs
r
Set voltage range 0 to 10 V
h
Configuration level
r
Setpoint value config.
r
Default setpoint value
r
Set
voltage input
Now the power controller power is preset via the external potentiometer.
A
S
E