JUMO 709051, Operating Manual, Page: 10 / 92

1 Introduction
10 V1.00/EN/00741192/2021-03-30 [IPC 300]
1.2 Safety information
1.2.1 Warning symbols
Caution
Danger
ESD
Dangerous volt-
age
Hot
surface,
fire hazard
1.2.2 Note symbols
Note
This symbol in connection with the signal word indicates that mate-
rial damage or data loss will occur if the respective precautionary
measures are not taken.
This symbol indicates that personal injury from electrocution may
occur if the appropriate precautionary measures are not taken.
E
This character is used if precautionary measures must be taken
when handling electrostatically sensitive components.
This symbol is used if dangerous voltages will cause an electric shock
in the event of contact with live parts.
This symbol is used if burns can result from touching a hot surface.
Do not install any heat-sensitive components or devices close to the
power controller.
This symbol is used to draw your attention to a particular issue.