JUMO 709051, Operating Manual, Page: 42 / 92

4 Operation
42 V1.00/EN/00741192/2021-03-30 [IPC 300]
4.1.1 Display and control elements
and can be used to view the current measured values such as cur-
rents, actual voltage values, setpoint value, load resistance, device tempera-
ture, and power.
This information is also displayed in the diagnosis window for the setup pro-
gram.
v
Chapter 7 "Setup program"
4.1.2 Appearance of measured values
Measured value
overview At this level, the designation of the measured value is displayed in the top line,
and the numerical value together with the unit is displayed in the middle.
The info line shows the selected input (with terminal designation), the active
subordinate control loop, and the operating mode.
It is also used to display temporary states (e.g. error messages).
v
Chapter 8 "Error messages and alarms"
Legend Comment Figure
1 The Power LED (green) lights up permanently when the voltage
supply is connected.
Chapter 9 "What to do, if ..."
2 Display (96 x 64 pixels) with white background lighting. The in-
formation line at the bottom of the display shows the current
settings and error messages.
3 The fuse LED (red) lights up if the semiconductor fuse is defec-
tive
4 LED K1 (yellow) collective fault signal active
5 Keys:
Increase value / previous parameter
Decrease value / next parameter
Cancel / one level back
OK / one level forward
6 USB setup interface
(1) (2)
(3)
(4)
(5)
(6)
Designation
Measured value
Info line or error