JUMO 709051, Operating Manual, Page: 49 / 92

V1.00/EN/00741192/2021-03-30 [IPC 300] 49
5 Configuration
5.1 Configuration level
The configuration level contains parameters for configuring the power control-
ler.
If the parameters at this level are modified during operation, the power control-
ler is locked (Inhibit) as a result. It does not provide any power in this state.
When exiting the configuration level with the key, the power controller
continues operation with the modified parameters.
This level can be locked with a password.
However, no password is set per default.
v
Chapter 5.1.11 "Change codes"
The configuration level can be accessed from the overview of measured val-
ues by pressing the following keys:
h
In the overview of measured values, press the key
h
Select the configuration level and press
The parameters are combined in the following groups, which are explained in
detail as sub-chapters in the tables on the following pages.
Scroll bar The entry highlighted in black is selected and contains further parameters.
If there are more than three entries in one level, a scroll bar that shows the cur-
rent position in the menu appears.
Navigation
Numerical entry
or
selection Once you have reached the required parameter, the and keys can
be used to enter a numerical value or a setting.
All parameters are listed in the following tables. Depending on the configura-
tion, any parameters that are not required are hidden.
/BWJHBUJPOQSJODJQMF
SFKFDU
DIBOHFT
DPOGJSN
DIBOHFT
EFDSFBTF7BMVF
OFYU1BSBNFUFS
JODSFBTF7BMVF
QSFWJPVT1BSBNFUFS