background image

 | Fathom 

ICS

Page 4

TABLE OF CONTENTS

Important Safety Instructions:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Introduction and Overview:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
System Components:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-7
Tools for Installation / Prepping the Work Area:    . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
What Is In The Box?: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Enclosure Mounting Hardware:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Enclosure Installation Procedure:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-31
Grille Installation Procedure:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33
Specifications:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

INTRODUCTION

Thank you for choosing the JL Audio Fathom In-Ceiling Subwoofer System, also 

known as the ICS. 

This document contains detailed instructions for the installation of the Fathom 

ICS enclosure. Since a portion of the enclosure will be inaccessible after installation, 

we strongly recommend reading these instructions completely before beginning the 

installation process. Please note, these instructions are for the installation of one (1) 

ICS enclosure. Simply repeat the steps to install additional enclosures.

FATHOM ICS SYSTEM OVERVIEW

The Fathom ICS is offered in two options:

ICS-SYS-108

 includes all elements for the installation of one (1) subwoofer.

ICS-SYS-208

 includes all elements for the installation of two (2) subwoofers.

Each Fathom ICS System consists of four elements:

ICS-SYS-108

ICS-SYS-208

(1) Enclosure

(2) Enclosures

(1) Subwoofer*

(2) Subwoofers*

(1) Grille Assembly **

(2) Grille Assemblies**

(1) 300W Amplifier **

(1) 600W Amplifier **

* Pre-installed in enclosure.   ** Not included with enclosure.
Each system includes specialized hardware to ensure proper installation.

Summary of Contents for FATHOM ICS-SYS-108





































Reviews: