Page 11
| Fathom
ICS
ENCLOSURE MOUNTING
APPLICATIONS
The Fathom ICS enclosure package
includes all parts and hardware
necessary for the installation of one
(1) enclosure. Since a portion of the
enclosure will be inaccessible after
installation, we strongly recommend
reading these instructions completely
before beginning the installation
process. To install additional
enclosures, simply repeat the steps.
Designed to fit most in-ceiling
installations, the ICS enclosure includes
mounting hardware to accommodate
ceiling cavities with assembled joists
ranging from 16-inches to 25 ½-inches
wide on center. While primarily
intended for ceiling applications,
the ICS enclosure is also compatible
with in-wall applications with walls
constructed from 2 x 6 studs or larger.
Refer to the figures at left to
identify which installation type
fits your specific application.
•
Type IC-1:
Ceiling cavities with
joist widths ranging from 16-inches
to 17 ½-inches on center.
•
Type IC-2:
Ceiling cavities
with joist widths ranging from
greater than 17 ½-inches to
25 ½-inches on center.
•
Type IW-1:
Wall cavities
constructed with 2 x 6
studs or larger, assembled
at 16-inches on center.
Note: This manual includes specific
steps and illustrations for in-ceiling
and in-wall applications. Make sure
to observe the Installation Type listed
at the top of the following pages for
your application (IC-1, IC-2, IW-1).
Type IC-1
Type IC-2
Type IW-1
Summary of Contents for FATHOM ICS-SYS-108
