Page 5
| Fathom
ICS
THE ENCLOSURE
The Fathom ICS enclosure utilizes extensive architectural features
aimed at improving rigidity while keeping a very low profile and minimal
wall thickness. A unique port design vents through a slot located at the
perimeter of the driver mount to enhance efficiency and low-bass output.
The ICS enclosure is outfitted with various spacers and padding in specific
areas, allowing it to only make gentle contact with its surrounding wallboard
surfaces. The placement and amount of pressure applied by these pads is a
critical design aspect to ensure proper fit and should not be altered in any
way. Failure to use the proper enclosure and/or alteration of the spacers
and padding will result in loss of performance and unwanted vibrations.
Designed to fit most in-ceiling installations, the ICS enclosure includes
mounting hardware to accommodate ceiling cavities with assembled joists
ranging from 16-inches to 25 ½-inches wide on center. While primarily
intended for ceiling applications, the ICS enclosure is also compatible with
in-wall applications with walls constructed with 2 x 6 studs or larger.
Enclosure Dimensions*
40.71 inches x 14.00 inches x 5.13 inches
1,034 mm x 355 mm x 130 mm
*Dimensions listed are approximate and do not include various spacers and padding.
Spacers and
padding will vary to
ensure a proper fit.
Summary of Contents for FATHOM ICS-SYS-108
