| Fathom
ICS
Page 8
TOOLS FOR INSTALLATION
Below is a list of recommended tools to perform the installation of the Fathom
ICS enclosure. Depending on the specifics of your installation, you may need
additional tools, hardware and/or accessories. We also recommend having a
second person to assist with lifting the enclosure during in-ceiling installations.
• Safety glasses
• Tape measure (100-inch minimum)
• Cordless drill/driver with #2 Phillips bit
• Drill bits
• Wire strippers
• Utility knife or scissors
• Wire cutters
• Right angle driver (optional)
• Pencil or Marker
• Drop cloth (optional)
• Masking tape (optional)
PREPPING THE WORK AREA
This manual illustrates installation in new construction homes, however
Fathom ICS enclosures may also be installed in pre-existing construction
applications. When working with pre-existing construction, you will need to
open a ceiling cavity or stud bay to expose the joists or studs on either side of
the opening. For pre-existing construction installations, we recommend using
masking tape and a drop cloth to protect the home’s interior from construction
debris.
WARNING
For your safety, make sure there are no live electrical circuits/conduits
within the ceiling cavity or stud bay prior to beginning the installation.
Summary of Contents for FATHOM ICS-SYS-108
