![background image](http://html1.mh-extra.com/html/jcm-global/vega-series/vega-series_operation-and-maintenance-manual_3554016044.webp)
P/N 960-100189R_Rev. 4 {EDP #148850}
© 2016, JAPAN CASH MACHINE CO., LTD.
4 - 2
Section 4
VEGA™ Series Banknote Validator
Disassembly/Reassembly
8. While lifting up on the Upper Transport Unit
a
), gently widen one side of the
Lower Transport Unit hinge area (Figure 4-4
b
),
and separate the Upper Transport Unit from the
Lower Transport Unit.
9. Pull the Front Bezel (Figure 4-5
a
) forward and
off the Upper Transport Unit (Figure 4-5
b
).
10. Remove the two (2) Flap Positioning Springs
a
1
&
a
2
) from the side of the Upper
Transport Unit (Figure 4-6
b
).
11. Remove the single E-Ring (Figure 4-7
a
) from the
end of the Flap Axis (Figure 4-7
b
).
12. Slide the Flap Axis containing the mounted left
c
) and remove the right
d
) and left Flap Lever from the Flap
Axis end.
13. Carefully remove the Flap 1 (Figure 4-7
e
) and
Flap 2 (Figure 4-7
f
) up and off the Upper Trans-
port Unit.
Figure 4-3
Upper Assembly Separation (Part
a
b
1
b
2
c
Figure 4-3
Upper Assembly Separation (Part 1)
Figure 4-4
Upper Assembly Separation (Part
b
a
Figure 4-4
Upper Assembly Separation (Part 2)
Figure 4-5
b
a
Figure 4-5
Front Bezel Removal
Figure 4-6
Flap Positioning Spring Removal
b
2
a
1
Figure 4-6
Flap Positioning Spring Removal
Figure 4-7
Shaft and Flap #1 & #2 Removal
a
b
c
d
e
f
Figure 4-7
Shaft and Flap #1 & #2 Removal
NOTE: When re-attaching the Right Flap
Lever, ensure that the retaining pin portion
of the left Flap Lever (Figure 4-8
a
)
securely fits into the Flap 1 mating hole
(Figure 4-8
b
) and the corresponding pin of
the right Flap Lever (Figure 4-8
c
) fits into
Flap 2 mating hole (Figure 4-8
d
).