![background image](http://html1.mh-extra.com/html/jcm-global/vega-series/vega-series_operation-and-maintenance-manual_3554016102.webp)
P/N 960-100189R_Rev. 4 {EDP #148850}
© 2016, JAPAN CASH MACHINE CO., LTD.
A - 4
Section A
VEGA™ Series Banknote Validator
Troubleshooting
Red
3
(300)
Blue
2
(300)
Banknote
Transportation Slips
An abnormal Banknote transportation error is detected when
transporting or rejecting Banknotes. The Transportation Slip Sensors do
not detect continuous Banknotes being transported according to the
rated value.
[Solution] Check that the following parts are properly assembled and/or
Harness connected, and clean all of the Sensors.
[Relative Parts] Feed Motor, Stack-in Sensor, Cash Box Sensor, Storage
Flap Sensor, Escrow Sensor, Validation Sensor
If the error is not resolved, change the above related part or parts.
Red
3
(300)
Blue
3
(300)
Transportation Times
Out
An abnormal Banknote transportation error is detected when
transporting or rejecting Banknotes. The Transportation Locks-up or
runs too slow. Sensors detect continuous Banknotes being transported
according to the rated value.
[Solution] Check that the following parts are properly assembled and/or
Harness connected, and clean all of the Sensors.
[Relative Parts] Feed Motor, Stack-in Sensor, Storage Flap Sensor,
Escrow Sensor, Validation Sensor
If the error is not resolved, change the above related part or parts.
Red
3
(300)
Red
3
(300)
Abnormal Timing
Response
(Transport, Reject,
other)
Sensors detect Banknotes remain in path or none exist during abnormal
timing.
[Solution] Check that the following parts are properly assembled and/or
Harness connected, and clean all of Sensors.
[Relative Parts] Stack-in Sensor, Box Sensor, Store Flap Sensor, Escrow
Sensor, RC Flap Sensor, Side Sensor, Pusher Mechanism Home
Position Sensor, Validation Sensor
If the error is not resolved, change the above relative part or parts.
Red
3
(300)
Red
5
(300)
Cash Box Seating
Problem
Cash Box Sensors detect a Banknotes remaining in path or a Cash Box
not properly seated.
[Solution] Check that the following parts are properly assembled and/or
Harness connected, and clean all of the Sensors.
[Relative Parts] Cash Box Sensor
If the error is not resolved, change the above related part.
Red
3
(300)
Purple
3
(300)
Pusher Mechanism
Position Problem
Pusher Mechanism Home Sensor detects that the Pusher Mechanism is
not presently seated at the Home end position.
[Solution] Check that the following parts are properly assembled and/or
Harness connected, and clean all of the Sensors.
[Relative Parts] Pusher Mechanism Home Position Sensor
If the error is not resolved, change the above related part.
Red
3
(300)
Orange
3
(300)
Stacker Full
When the Pusher Mechanism movement proceeds toward stacking, the
Stacker-full Sensor determined that the time taken is longer than
specified value for the function.
[Solution] Check that the following parts are properly assembled and/or
Harness connected. and clean all of the Sensors.
[Relative Parts] Pusher Mechanism Assembly and inspect movement
path
If the error is not resolved, change the above related part.
Red
3
(100)
Cyan
3
(100)
Pause
*
Intake Sensor detects Banknote at a position where it can be returned
while in the transportation process.
[Solutions] Check that the following parts are properly assembled and/or
Harness connected, and clean all of the Sensors.
[Relative Parts] Intake Sensor
If error is not resolved, change the above relative part.
*. The Flash error pause time between blinks is a 100msec duration.
Table A-2
Error Codes
On-line Off-line
Error
Causes and Solutions
Color
Flashes
(Interval
[msec])
Color
Flashes
(Interval
[msec])