Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 765 / 924

6-89
SERVICE AND MAINTENANCE
CAUTION
• Some impact wrenches available
in the market produce torques
higher than the maximum torque
specified for tightening the wheel
nuts. If the wheel nuts are tightened
with such an impact wrench, wheel
bolts might be broken. Before using
an impact wrench, check that the
torque it produces conforms to the
specification.
• When using an impact wrench,
carefully adjust the air pressure
regulator and select the tightening
time. As a final step, tighten to the
specified torque using a torque
wrench.
8. Tighten the wheel nuts in a diagonal
sequence and in two or three passes.
Tightening torque
120 N·m (12 kgf·m/ 87 lb·ft )
9. Finally, tighten all wheel nuts using a
torque wrench to the specified torque.
6. Screw in each wheel nut by hand until
it touches the nut seating surface on
the disc wheel, and then finger tighten
all wheel nuts until the wheel is held
in position without any looseness.
Face the tapered end of wheel nuts
inward.
7. Turn the bleeder screw of the jack
counterclockwise to lower the vehicle
slowly.
RTUL60SH009101
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 89 2020/11/05 11:54:18