Isuzu D-MAX 2020 Owner'S And Driver'S Manual Download Page 700

Page: 700 / 924

6-24

SERVICE AND MAINTENANCE

ADVICE

• Any oil level above the "Inspection MAX" mark on the oil dipstick may cause

engine malfunctions. Change the oil whenever its level exceeds the "Inspection

MAX" mark.

• Fuel will gradually become mixed with the engine oil, thinning it out. Be sure to

change the oil at the specified intervals.

• The oil level read by the oil dipstick changes depending on the amount of time

that elapses after the engine is turned off. In order to confirm the correct oil

level, perform the check while the engine is cold before starting it. If the engine

has already been started, stop it after it has sufficiently warmed and wait 30

minutes or more before performing.

5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 24

2020/11/05 11:54:08

Summary of Contents for D-MAX 2020





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands

Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands