Isuzu D-MAX 2020 Owner'S And Driver'S Manual Download Page 330

Page: 330 / 924

4-54

CONTROLS AND INSTRUMENTS

Brake System Warning Light

This warning light comes on while the

engine is running (after startup) in the

following situations:

• Drop in the level of brake fluid (due to

brake wear or fluid leakage, etc.)

• On an anti-lock brake system (ABS)

model, abnormality in the EBD (the

ABS warning light will also come on.)

ABS Warning Light

→ Refer to page 4-56

CAUTION

• If the brake system warning light comes on while the engine is running,

immediately stop your vehicle at a safe place well clear of traffic and promptly

contact the nearest Isuzu Dealer for inspection.

• Immediately stop your vehicle at a safe place and contact your Isuzu Dealer

when the ABS warning light and brake system warning light both remain on.

The indications mean that the ABS will fail and vehicle will become extremely

unstable during braking. Also the rear brakes may lock up more easily than

usual in emergency braking. This could result in an accident.

5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 54

2020/11/09 14:06:54

Summary of Contents for D-MAX 2020





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands

Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands