Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 285 / 924

4-9
CONTROLS AND INSTRUMENTS
RTUL40SH000301
Models without Passive Entry and
Start System
1. Make sure that the parking brake
lever is fully pulled.
If your vehicle is a manual
transmission model, make sure
that the gearshift lever is in the "N"
position and then depress the clutch
pedal and brake pedal fully.
In an automatic transmission model,
make sure that the selector lever is in
the "P" position and then depress the
brake pedal fully.
2. When the starter switch is turned
to the "ON" position, the glow plug
indicator light comes on and will then
go out in approximately 0.5 seconds
if the engine is warm. If the engine is
cold, it will go out after remaining on
for a maximum of approximately 7
seconds.
3. After confirming that the glow plug
indicator light has gone out, turn the
starter switch to the "START" position
to start the engine.
Glow plug indicator light
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 9 2020/11/09 14:06:48