Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 797 / 924

6-121
SERVICE AND MAINTENANCE
Keep the battery clean. If the battery is left in a dirty condition, contaminants can get
mixed into the battery fluid, the battery plates can be damaged, short circuits can occur
on the top surface of the battery and the battery's service life can be reduced.
Battery Handling Precautions
When Performing Inspection or
Maintenance
Before starting inspection and maintenance
of the battery or other parts of the electrical
system, switch the power mode to "OFF"
(models with passive entry and start
system) or turn the starter switch to the
"LOCK" position (models without passive
entry and start system), wait at least 5
minutes, and then disconnect the negative
cable from the negative terminal. If the
negative cable is disconnected within 5
minutes, the electronic control system of
the vehicle may malfunction.
There is a danger that electrical
components could be damaged if
inspection or maintenance is carried out if
the battery remains connected.
Engine Start/Stop Button (Models with
Passive Entry and Start System)
→ Refer to page 4-112
RTUL40SH000301
Models without passive entry and
start system
Models with passive entry and start
system
RTUL60SH006101
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 121 2020/11/05 11:54:21