Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 697 / 924

6-21
SERVICE AND MAINTENANCE
Checking Condition of the Engine at Low Speeds
and during Acceleration
1. Make sure that the parking brake
lever is fully pulled.
If your vehicle is a manual
transmission model, make sure
that the gearshift lever is in the "N"
position and then depress the clutch
pedal and brake pedal fully.
In an automatic transmission model,
make sure that the selector lever is in
the "P" position and then depress the
brake pedal fully.
2. Push the engine start/stop button
(models with passive entry and start
system) or turn the starter switch
(models without passive entry and
start system) to start the engine, and
run it to warm up.
Starting the Engine
→ Refer to page 4-4
3. Check that the engine is running at a
speed within the standard idle speed
range.
4. Drive the vehicle, making sure the
accelerator pedal does not stick when
gradually accelerating, the engine
speed rises smoothly and it does not
knock. If there are any abnormalities
(accelerator pedal sticking, rough
engine acceleration, knocking, etc.),
stop your vehicle at a safe place, stop
the engine, and contact your nearest
Isuzu Dealer.
RTUL60SH000901
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 21 2020/11/05 11:54:08