Isuzu D-MAX 2020 Owner'S And Driver'S Manual Download Page 149

Page: 149 / 924

2-93

IMPORTANT INFORMATION

Refilling AdBlue

AdBlue

Tank → Refer to page 3-55

If you refill the tank with AdBlue

by yourself, refer to the procedure to refill the tank

with AdBlue

in "AdBlue

Tank".

It is also possible to refill the tank with AdBlue

at your Isuzu Dealer.

ADVICE

• If there is no remaining AdBlue

, the engine cannot be restarted. Refill the

AdBlue

tank before the remaining AdBlue

runs out.

NOTE

• Refill AdBlue

before winter comes. The detection of refilling takes longer if

AdBlue

is added when urea is frozen.

Disposing of AdBlue

Do not dispose of AdBlue

or its empty containers into lakes, seas, rivers, or other

such places.
Dispose of in an appropriate way complying with local legal requirements.

5108428_sec02_IMPORTANT INFORMATION.indd 93

2020/11/13 14:48:41

Summary of Contents for D-MAX 2020





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands

Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands