Isuzu D-MAX 2020 Owner'S And Driver'S Manual Download Page 161

Page: 161 / 924

3-11

PRE-DRIVING OPERATIONS AND ADJUSTMENTS

Locking

All doors must be closed. Press the lock

button on the remote control unit again

within 10 seconds after locking. The hazard

warning flasher will flash once only when

the super lock is activated. Lock buttons

on all doors are positioned such that doors

cannot be opened.
In models with passive entry and start

system, after pressing the request switch

on the driver side door and passenger side

door once to lock the door, pressing the

lock button again within 10 seconds while

in possession of the electronic key also

activates the super lock.

WARNING

• Do not use the system if there are

people in the vehicle. The doors

cannot be unlocked from inside.

RTUL30SH018501

Super Lock (Mechanical Anti-theft Locking System)

Remote control unit (keyless entry

key)

Remote control unit (electronic key)

RTUL30SH018601

Driver side door handle (passive

entry and start system)

RTUL30SH027801

Request switch

NOTE

• Only the right-hand drive models for

the European market are equipped

with this function.

5108428_sec03_PRE-DRIVING OPERATIONS.indd 11

2020/11/06 10:49:00

Summary of Contents for D-MAX 2020





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands

Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands