Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 614 / 924

4-338
CONTROLS AND INSTRUMENTS
4WD Switch
CAUTION
• Driving in 4WD mode on dry, well-paved roads can accelerate wearing of the
front tires and reduce fuel efficiency. As this action can also increase vehicle
noise levels and lead to drive system damage, 2WD should always be used
under these driving conditions.
Use the 4WD switch to select 2WD or 4WD
("4H (4WD high)" or "4L (4WD low)").
RTUL40SH021201
NOTE
• When the vehicle speed, engine speed, gearshift lever (manual transmission
models) or the selector lever (automatic transmission models) position, or
clutch pedal operating condition (manual transmission models) conflict with
the changing conditions and when there is an abnormality in 4WD system, a
warning buzzer sounds to alert you that switching is not possible.
• In the event that the 4WD indicator light or 4WD low indicator light fail to either
go off or come on even when the 4WD switch is operated, have the vehicle
inspected and serviced at your Isuzu Dealer.
• When the CHECK 4WD warning light is on, have the vehicle inspected and
serviced at your Isuzu Dealer.
4WD Indicator Light
→ Refer to page 4-84
4WD Low Indicator Light
→ Refer to page 4-84
CHECK 4WD Warning Light
→ Refer to page 4-67
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 338 2020/11/12 15:29:15