Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Page: 162 / 924

3-12
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
Unlocking
Press the unlock button on the remote
control unit. When the super lock is
deactivated, the hazard warning flasher will
flash twice.
In models with passive entry and start
system, press the request switch while
in possession of the electronic key also
deactivates the super lock.
RTUL30SH018701
CAUTION
• Unlocking is not possible in any
other way, so keep the remote
control unit to hand in a safe place.
NOTE
• If you use the key to open the
vehicle door, the horn will sound and
the hazard warning flasher will flash
on and off.
To stop the horn and hazard warning
flasher, perform any of the following
operations:
- Push the engine start/stop button
to switch the power mode to "ON"
(models with passive entry and
start system).
- Insert the key into the starter
switch and turn it to the "ON"
position in models with keyless
entry system (radio remote control
units for door-lock).
- Press the request switch while in
possession of the electronic key
(models with passive entry and
start system).
- Press the unlock button on the
remote control unit.
Remote control unit (keyless entry
key)
Remote control unit (electronic key)
RTUL30SH018801
Driver side door handle (passive
entry and start system)
RTUL30SH027701
Request switch
5108428_sec03_PRE-DRIVING OPERATIONS.indd 12 2020/11/06 10:49:01