Isuzu D-MAX 2020 Owner'S And Driver'S Manual Download Page 729

Page: 729 / 924

6-53

SERVICE AND MAINTENANCE

Change the fuel filter in accordance with the Maintenance Schedule. Have fuel filter

replacement performed at an Isuzu Dealer.

Drain the water when the water separator warning light comes on.

Fuel Filter

Maintenance Schedule

→ Refer to page 6-142

Water Separator Warning Light

→ Refer to page 4-65

ADVICE

• Water remaining that is not discharged from the water separator (fuel filter)

could freeze and damage the vehicle.

CAUTION

• If the water separator warning light comes on while the engine is running,

immediately drain water from the fuel filter. If you still continue driving with the

warning light on, the fuel injection system may fail.

5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 53

2020/11/05 11:54:15

Summary of Contents for D-MAX 2020





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands

Isuzu D-MAX 2020, Owner'S And Driver'S Manual

Search results

Summary of Contents for D-MAX 2020

Reviews:

Related manuals for D-MAX 2020

Brands by name

Popular brands