Iseki TG5330, Operation Manual

Page: 66 / 176

OPERATION
65
PTO Operating Control
FIG. 5-17 To select rear PTO - Make sure PTO control
switch is OFF and then move rear PTO selector lever, 2,
engage gear set, 4, inside rear housing.
To engage PTO - Turn PTO switch, clockwise and then
pull up to actuate hydraulic clutch, 5, and complete the
drive. The indicator light in the warning light strip will come
on, showing PTO clutch is engaged.
To disengage PTO - Push PTO switch, 1, to release
hydraulic clutch, 5.
When further use of rear PTO is not required, depress
clutch pedal and return rear PTO selector lever, 2, to neu-
tral.
FIG.5-18 To select mid PTO - Make sure PTO control
switch is off and then move PTO selector lever, 8, back-
ward to mid PTO position to engage gear set in mid PTO.
NOTE: PTO can be engaged/disengaged by control
switch, 1, independently of main clutch. Reduce
engine rpm prior to engaging (switching on) and
disengaging (switching off) PTO.Always move
PTO control switch to OFF before shifting rear or
mid PTO selector levers.Rear and mid PTO can
be operated separately or together.
8
2
FIG. 5-18
1
FIG. 5-17
FIG. 5-16