Iseki TG5330, Operation Manual

Page: 33 / 176

32
TG5330,5390,5470
ENGINE SPEED CONTROLS
CAUTION: Always select engine speed to
ensure safe operation. Reduce speed prior to
turning or backing Tractor.
IMPORTANT: DO NOT race or excessively load cold
engine.
FIG. 4-17: Hand Throttle Lever, 1 - Controls engine
speed and will remain in position selected by the operator.
With hand lever forward, engine will idle. Engine speed
increases as lever is pulled progressively rearward.
Foot Throttle Pedal, 2 - Will override setting of hand
throttle lever for increased engine speed. When pedal is
released, engine speed returns to hand throttle lever set-
ting.
CAUTION: When using foot throttle pedal, the
hand throttle lever must be in the low idle
speed position. This ensures maximum
engine braking when pedal is released.
TRANSMISSION SHIFT LEVERS
Three shift levers are used to select ground travel speed
through different gear reductions within the drive train.
Forward and reverse travel directions are also possible in
all gear selections.
IMPORTANT: All range and gear change selections
require complete disengagement of main
clutch (depressing pedal).
1
2
FIG. 4-17