Iseki TG5330, Operation Manual

Page: 131 / 176

130
TG5330,5390,5470
FIG. 6-16: Cleaning Insect Net ,1
When the tractor is operated in fields or at night, the
insect net may become clogged with grass, straw, insects
and other matter.
Open the hood, pull out the insect net and clean it.
Cleaning Radiator Core ,2
Wash away any dirt or other foreign matter in between the
fins with tap water.
IMPORTANT: When the radiator becomes clogged, it
will overheat, resulting in increased oil
consumption.
Be careful not to apply high pressure
water directly to the radiator as this may
result in deformation of the fins.
Do not directly spray water on the electri-
cal wiring or electrical parts around the
engine.
FIG. 6-17: Correct fan belt tension helps to insure ade-
quate coolant flow through cylinder block and radiator.
Belt is correctly tensioned when belt deflection is approxi-
mately 14 mm when thumb pressure (10kgf) is exerted at
center of belt span.
CAUTION: Due to muffler position, allow to
cool before checking or adjusting fan belt
tension.
FIG. 6-18: To adjust belt tension, loosen alternator pivot
bolt, 1, and tensioning bracket bolt, 2. Pull outward on top
of alternator to correctly tension belt and tighten bolt, 2,
first and then tighten pivot bolt, 1.
IMPORTANT: Do not pry against alternator housing or
pulley. Carefully pry against alternator
mounting flange to prevent damage.
FIG. 6-17
FIG. 6-18
1
2
FIG. 6-16