Iseki TG5330, Operation Manual

Page: 77 / 176

TG5330,5390,5470
76
DRAWBAR
FIG. 5-42: Drawbar, 1, at rear of Tractor allows pull- type
implements to be attached to Tractor. Maximum vertical
load on drawbar must not exceed 880 lbs (400 kg).
CAUTION: Pulling heavy loads will require
extended braking distances. Reduce travel
speed.
Make sure attachment is properly secured and safety
chain is used.
NOTE: When using three-point hitch, it may be neces-
sary to remove drawbar by removing clips and
pins, 2, and sliding drawbar from bracket to
improve operating clearance. This is particularly
true with mounted implements using PTO drive.
ROLL OVER PROTECTIVE STRUCTURE (ROPS)
Rear ROPS type
FIG. 5-43a: This tractor is equipped with a roll-over pro-
tective structure (ROPS). Seat belts must be worn.
When the tractor is not being operated, the ROPS can be
folded down if it will hit the roof of the garage where it is
parked.
When the locking pin, 1, is removed, the upper
portion, 2, of the ROPS can be folded down to
the rear.
WARNING: Do not operate the tractor with the
ROPS folded down. This may result in serious injury if
the tractor rolls over.
2
1
FIG. 5-42
1
2
FIG. 5-43a