Iseki TG5330, Operation Manual

Page: 84 / 176

83
OPERATION
GROUND SPEED SELECTION
Power Shift type
Tractor is equipped to provide twelve forward gear speeds
and twelve reverse gear speeds.
FIG. 5-50: Gear shift button, 1, provides four gear selec-
tions. These gear selections are compounded by range
shift lever, 2. The range shift lever provides three major
changes in ground speed. Gear shift button provides
smaller ground speed changes.
FIG. 5-51: Depress clutch pedal and position shift levers
in desired positions. Depress brake pedals to release
parking brake lock and then slowly release clutch pedal.
Should another transmission gear be desired:
Gear Shift Button-Push gear shift button to select the
desired speed and continue with operation.
+: Push gear shift ) to increase the traveling
speed.
-: Push gear shift button(-) to reduce the traveling
speed.
NOTE: Gear shift buttons are not available when shifting
range gear in neutral position.When starting
engine, set 1st gear in gear speed selection auto-
matically. Range gear position become 3rd gear
automatically when shfting shuttle lever rearward
in traveling forward 4th range gear.
IMPORTANT: Depress clutch and stop Tractor before all
range lever shifts.
CAUTION: Do not use gear shift button when
loading or unloading the tractor on/off a
truck. Drive the tractor slowly and carefully at
the moment the tractor moves from ramps
onto the level platform.
Do not use gear shift button when traveling
on steep slope. Make engine speed low
before pushing the gear shift button.
Otherwise it may cause front-tyre lift up or
tractor turnover.
FIG. 5-50
FIG. 5-51