Iseki TG5330, Operation Manual

Page: 42 / 176

41
INSTRUMENTS & CONTROLS
INSTRUMENT PANEL
FIG. 4-32: Arrangement of gauges. Control switches and
indicators located in instrument panel. Items are detailed
in the descriptions that follow:
Electric Fuel Shut-Off
Turning main switch to off position will stop engine.
Main Switch
FIG. 4-33: Main switch, 1, has the four following positions:
・
p
OFF - Tractor engine and all electrical circuits
off.(except for head light, turn/hazard position light,
tail light, working lamp) Key can be removed.
・
O
ON - Power supplied to all circuits. Normal operating
position. Linkage on fuel injection pump moves
(electrically) to the run position.
・ f
START - Starter activated. This position spring
loaded to ON .
・ G
GLOW - Energizes glow plugs to pre-heat combus-
tion chambers and assist starting.
NOTE: Main switch must be turned to ON before any
circuits will operate. PTO switch must be off and
gear shift lever in neutral before engine can be
started.
This tractor is equipped with an electric fuel shut
off. When main switch, 1, is turned to start , on ,
or glow position and gear shift lever is placed in
neutral, a solenoid moves the fuel linkage on
injection pump to run position to start engine.
When main switch is turned to off , solenoid
moves fuel linkage to off position to stop engine.
FIG. 4-34: When main switch, 1, is selected to GLOW
position, glow indicator, 2, will illuminate after several sec-
onds to indicate the engine combustion chambers are pre-
heated and allow cold engine to be started.
FIG. 4-32
p
FIG. 4-33
2
FIG. 4-34