Iseki TG5330, Operation Manual

Page: 132 / 176

131
LUBRICATION & PERIODIC MAINTENANCE
Cleaning Air Cleaner / Vacuator Valve
FIG. 6-19: Open the hood, and remove the left side cover
and front grill.
Press the vacuator valve, 2 , to discharge any dirt inside.
If there is moisture, wipe the inside of the air cleaner, 1 , with
a rag.
FIG. 6-20: Cleaning/Replacing Air Cleaner Filter Element
Remove the clip, 3, and take the filter element, 4, out of
the air cleaner.
Use the following procedure to clean the filter ele-
ment:
When there is dry dust
Blow air from the inside of the filter element, or lightly tap
the filter element with your hand to discharge the dust.
When there is moist dirt or oil
Dilute a neutral household detergent in water, and soak
the filter element for about 30 minutes. Then rinse the fil-
ter element and allow it to naturally dry.
After cleaning the filter element, push it straight back into
the air cleaner to securely assemble it.
IMPORTANT: Do not hit the filter element against a rock,
concrete or other hard item when cleaning
it. This may result in damage or deforma-
tion of the filter element, inhibiting engine
performance.
1
2
FIG. 6-19
4
3
FIG. 6-20