Iseki TG5330, Operation Manual

Page: 156 / 176

DIGITAL PANEL CONTENTS
155
Attention Display
Digital display shows the following indication, when starting engine with shuttle lever ’forward/reverse position’ or PTO
switch ’ON’ position. Before starting engine, confirm that forward/reverse shuttle lever in nuetral position and PTO
switch is OFF position.
Service Interval
Service Interval Lamp would illuminate when hourmeter indicates 50/100/200/300/400
･･･
hour.
Digital panel also would inform ’Service inspection’ when hourmeter indicates 50/100/200/300/400
･･･
hour.
Please inspect your tractor.
Gear Shift Error
Digital display shows the following indication, when gear shift is problem.
Please consult your dealer.
6 Traveling/Rear PTO Speed
Pushing selectable switch for 2 sec-
onds at this monitor, digital panel
would indicate traveling speed and
rear PTO speed per 5 seconds
automatically.Pushing selectable
switch again, digital panel would
return to normal mode.
No
1
2
Item
Shuttle Lever
Shuttle lever is reverse position. Shift
shuttle lever in neutral position.
Shuttle lever is forward position. Shift
shuttle lever in neutral position.
PTO switch is ON position.
Turn PTO switch OFF.
PTO switch
Display Indication Note
No
1
Item
Periodic Maintenance
Digital panel would return to normal
mode by pushing selectable switch.
Display Indication Note
No
1
2
3
4
5
6
Item
Gear shift sensor problem
Gear shift sensor problem
Gear shift sensor problem
Gear shift sensor problem
Gear shift sensor problem
Gear shift sensor problem
Shift location sensor is not normal, or
wiring harness of Shift location sen-
sor is not normal.
Adjustment of shift location sensor is
not normal.
Consult your Dealer.
Shifting gear(1st) is not normal.
Consult your Dealer.
Shifting gear(2nd) is not normal.
Consult your Dealer.
Shifting gear(3rd) is not normal.
Consult your Dealer.
Shifting gear(4th) is not normal.
Consult your Dealer.
Display Indication Note