Iseki TG5330, Operation Manual

Page: 47 / 176

46
TG5330,5390,5470
MAIN CLUTCH PEDAL (ONLY POWER SHIFT TYPE)
FIG. 4-45: Foot pedal, 1, disengages engine from transmis-
sion when fully depressed, to permit engine starting, select-
ing/changing gears and stopping Tractor movement. Four-
wheel drive selection also requires clutch disengagement.
Slowly raising the pedal will engage clutch and start
Tractor moving in selected gear.
NOTE: Clutch pedal should be depressed quickly to pre-
vent abnormal wear. Clutch pedal should be
raised smoothly to prevent sudden movement.
DO NOT ride clutch pedal with your foot.
IMPORTANT: Correct clutch pedal free-play adjust-
ment is a must. Refer to
Maintenance section.
BRAKES
Brake Pedals & Parking Brakes
FIG. 4-46: Inner brake pedal, 1, and outer brake pedal, 2,
independently control the respective left and right wheel
brakes, to assist in turning.
During Tractor transport or high speed operation, brake
pedals must be latched together using interlocking plate,
3.
CAUTION: Do not use individual wheel brakes
for transporting or operating at high speed.
Always latch pedals together using interlock-
ing, plate, 3. Make sure brakes are adjusted
evenly.
Parking Brake lever
WARNING: ALWAYS apply the parking brake
before dismounting from the tractor.
FIG. 4-47 & 4-48: The parking brake acts on the tractor
rear wheels. To engage the brake, pull upward on the
parking brake lever, 4 to lock brakes in applied
position.To release the parking brake, press the button on
the end of the lever and push the lever down.
When pulling upward on the parking brake lever, the park-
ing brake indicator light will illuminate.
Ensure the parking brake is fully released before driving
off.
1
FIG. 4-45
1
2
3
FIG. 4-46
4
FIG. 4-47
FIG. 4-48