Iseki TG5330, Operation Manual

Page: 31 / 176

30
TG5330,5390,5470
FIG. 4-11: Turn/hazard indicator lights, 11 and 12, will
operate with ROPS-mounted warning lights. This provides
operator with easy indication of warning light selection.
Power Take-Off (PTO) Switch
FIG. 4-12 & 4-13: A dial-type safety switch, 1, is used to
engage and disengage the PTO drive system.
The switch must first be turned to right and then pulled up
to engage PTO. When engaged, the PTO indicator light in
the indicator light strip will illuminate.
A PTO selectable switch, 2, is used to adjust PTO clutch
modulation.
Push on: soft start (button depressed illuminated) - for
high inertia loads
Push off: standard start (button out and not illuminated)
IMPORTANT: PTO switch is equipped with a lock-out
to prevent accidental engagement of
PTO system. To engage PTO, first turn
switch clockwise and then pull up it. DO
NOT FORCE SWITCH.
NOTE: PTO switch, 1, must be used in conjunction with
rear PTO selector lever, to left of operator’s seat,
when rear PTO is used. Refer to Operation
sec-
tion for complete details.
When PTO control switch is ON the engine can-
not be started. Always switch off PTO and
depress main clutch pedal to start engine.
WARNING: Always shut off PTO and shut off
Tractor engine before servicing PTO-driven
implement. Allow all movement and motion to
stop before leaving operator’s seat.
11 12
FIG. 4-11
2
FIG. 4-12
FIG. 4-13