INVT GD350-004G/5R5P-45-AS, Operation Manual

Page: 185 / 372

Goodrive350 IP55 High-ingress Protection Series VFD Function parameter list
-176-
Function
code
Name Description
Default
value
Modify
P09.18
Low-frequency
integral time (Ti)
0.00
–10.00s
0.90s
○
P09.19
Low-frequency
differential time
(Td)
0.00
–10.00s
0.00s
○
P09.20
Low-frequency
point of PID
parameter
switching
0.00
–P09.21
5.00Hz
○
P09.21
High-frequency
point of PID
parameter
switching
P09.20
–P00.04
10.00Hz
○
P09.22
–
P09.28
Reserved / /
/
P10
––Simple PLC and multi-step speed control
Function
code
Name Description
Default
value
Modify
P10.00
Simple PLC
mode
0: Stop after running once; the VFD stops
automatically after running for one cycle, and it can
be started only after receiving running command.
1: Keep running in the final value after running
once; The VFD keeps the running frequency and
direction of the last section after a single cycle.
2: Cyclic running; the VFD enters the next cycle
after completing one cycle until receiving stop
command and stops.
0
○
P10.01
Simple PLC
memory
selection
0: No memory after power down
1: Memory after power down; PLC memories its
running stage and running frequency before power
down.
0
○
P10.02
Multi-step
speed 0
Setting range of the frequency in 0
th –15 th
sections
are -300.0
–300.0%, 100% corresponds to max.
output frequency P00.03 .
Setting range of the running time in 0
th –15 th
sections are 0.0
–6553.5s (min), the time unit is
determined by P10.37 .
When simple PLC operation is selected, it is
required to set
P10.02
–
P10.33 to determine the
running frequency and running time of each
section.
Note: The symbol of multi-step speed determines
the running direction of simple PLC, and the
0.0%
○
P10.03
Running time
of step 0
0.0s(min)
○
P10.04
Multi-step
speed 1
0.0%
○
P10.05
Running time
of step 1
0.0s(min)
○
P10.06
Multi-step
speed 2
0.0%
○
P10.07 Running time
0.0s(min)
○