Intel SR2612UR - Server System - 0 MB RAM, Service Manual

Page: 12 / 162

xii Intel
®
Server System SR2612UR Service Guide
Figure 43. Routing the Cables Through the Fan Assembly .................................................... 50
Figure 44. Mounting an External Battery ................................................................................ 50
Figure 45. Removing the Power Supply ................................................................................. 51
Figure 46. Removing the Main Power Connector from the Backplane ................................... 52
Figure 47. Removing the Logic Cable Connector from the Backplane ................................... 52
Figure 48. Removing the Midplane from the Enclosure.......................................................... 53
Figure 49. Removing the Screws that Attach the Backplane.................................................. 53
Figure 50. Pulling Back the Backplane and Lifting It Out of the Enclosure............................. 53
Figure 51. Locate the battery .................................................................................................. 54
Figure 52. Remove the standoff.............................................................................................. 55
Figure 53. Align the battery pack ............................................................................................ 55
Figure 54. Aligning the battery pack ....................................................................................... 56
Figure 55. Replace and tighten standoff ................................................................................. 56
Figure 56. Route the cable...................................................................................................... 56
Figure 57. Connect the cable to PCI RAID Card .................................................................... 57
Figure 58. Disconnect the power cables................................................................................. 58
Figure 59. Disconnect the fan cables...................................................................................... 58
Figure 60. Remove the screws ............................................................................................... 59
Figure 61. Installing the server board ..................................................................................... 60
Figure 62. Attach the screws .................................................................................................. 60
Figure 63. Installing power cables .......................................................................................... 61
Figure 64. Install the fan cables .............................................................................................. 61
Figure 65. Disconnect the power cables................................................................................. 63
Figure 66. Remove the screws ............................................................................................... 64
Figure 67. Remove cable chase ............................................................................................. 64
Figure 68. Remove the four screws from the PDB ................................................................. 65
Figure 69. Installing the Power Distribution Module................................................................ 65
Figure 70. Route cable P4 ...................................................................................................... 66
Figure 71. Install the nylon clamps ......................................................................................... 66
Figure 72. Connecting cable P4 to backplane ........................................................................ 67
Figure 73. Foam orientation.................................................................................................... 67
Figure 74. Install the power cables ......................................................................................... 68
Figure 75. Installing a Disk Drive in a Universal Carrier ......................................................... 76
Figure 76. Installing the Four Screws into the Drive Carrier ................................................... 77
Figure 77. Orienting the Plastic Insert with the Drive Carrier.................................................. 78
Figure 78. LED Statuses......................................................................................................... 85
Figure 79. LED Board ............................................................................................................. 86
Figure 80. Disk Drive LEDs..................................................................................................... 86