Intel
®
Server System SR2612UR Service Guide
45
Midplane Board Replacement
Complete the following steps to remove and install an midplane in the Intel
®
Server
System SR2612UR.
1. Ensure the AC power cord(s) are disconnected from the enclosure.
2. Remove the top cover from the enclosure by loosening the captive screw with a
Phillips screwdriver on the right-rear of the enclosure.
3. Slide the top cover back and lift it from the enclosure.
4. Locate the midplane (located between the backplane and fans).
Figure 38. Midplane
5. Disconnect the I/O cable by depressing the release tab and pulling the cable
upward.
Caution: You must depress the I/O SAS cable release tab when removing the cable to prevent I/O
connector damage.
6. Remove the two screws holding the midplane in place.
Summary of Contents for SR2612UR - Server System - 0 MB RAM
