EonStor DS S48 Series Hardware Manual
3. To attach the rack slide rail bracket
(3)
and rack slide rail
(2)
onto the front and
rear posts of the rack, adjust the bracket positions and fasten the eight M4 x
6mm retention screws
(6)
(4 screws on each bracket) to secure the brackets.
Fasten the M5 x 20mm screws to secure the rack slide rail onto the front and
rear posts.
4
6
3
2
4
4. To attach the enclosure slide rails to the enclosure, align the enclosure slide rail
sockets to the hinges protruding on the side of the enclosure and fit the
enclosure slide rail onto the enclosure. Once fitted, slide it backwards to expose
a screw hole at the end. Secure the enclosure slide rail onto the enclosure by
fastening a M4 x 6mm screw.
06
37
