EonStor DS S48 Series Hardware Manual
30
drives along with the system, brackets will be pre-installed onto the hard drive(s)
for you while the brackets included in the accessory box will act as spares.
5.
Install hard drive:
After the hard drives brackets have been installed onto the
hard drives, you can install it into the enclosure itself (only install hard drives
AFTER
the enclosure has been rack mounted onto the rack).
6.
Connect cables:
Use the supplied power cords to connect the system to main
power. It is recommended to connect power cords to separate and independent
power sources (different circuit breakers for redundancy).
7.
Power on:
Once the components have been properly installed and all cables are
properly connected, you can power up the system and configure the RAID array.
