EonStor DS S48 Series Hardware Manual
6. When the “
Restore Def.
” LED
(2)
turns on and the “
Default Restored
” firmware
event message appear on the LCD, you may release the Restore Default button
(the system default has been restored).
7. To restore previous ID/LUN mapping settings, users may use the following
options:
3. Use the “
Restore NVRAM from Disks
“or “
Restore NVRAM from
Files
” functions in the firmware. ID/LUN mapping will be restored.
Or
4. Use the LCD panel to restore ID/LUN mapping settings (refer to the
illustration below).
Legend
Ent: Press the Enter (Ent) button.
Ent
: Press and hold the Enter (Ent) button for 2 seconds.
---->
:
Press the up and down arrow to scroll to the menu you are after.
100
