EonStor DS S48 Series Hardware Manual
2.5.2
Slide Rail Installation Procedure
1. To separate the enclosure slide rail
(1)
from the rack slide rail
(2)
, you must fully
extend the slide rail, press down on the release lever (indicated by the blue
arrow) on the side and pull the enclosure slide rail apart from the enclosure rack
slide rail.
1
2
2. To install the rack slide rail onto the rack posts, determine the position of the
rack slide rail bracket on the rack. Use the provided M5 cage nuts
(5)
if your
rack has un-threaded holes and secure it to the rack post using two M5 x 20mm
screws
(4)
.
36
