EonStor DS S48 Series Hardware Manual
9.
Push the ejection levers upward
and fasten the retention screw on the ejection
levers.
10.
Reattach all the cables.
11.
(For single controller models or when replacing both controllers
simultaneously) Power up the system.
Check system message on the LCD
screen, SANWatch, or firmware menu-driven utility. When the replacement
controller is successfully brought online, its Controller Status LED should turn on
properly (refer to
12.
(For single controller models or replacing both controllers simultaneously)
Restoring NVRAM data.
To
restore previous ID/LUN mapping settings, users
may use the following options:
5. Use the “
Restore NVRAM from Disks
“or “
Restore NVRAM from
Files
” functions in the firmware. ID/LUN mapping will be restored.
Or
6. Use the LCD panel to restore ID/LUN mapping settings (refer to the
illustration below).
Legend
Ent: Press the Enter (Ent) button.
Ent
: Press and hold the Enter (Ent) button for 2 seconds.
---->
:
Press the up and down arrow to scroll to the menu you are after.
104
