IDS IDS-iSYS, User Manual

Page: 103 / 263

The results of the work list can be displayed in tabular mode.
•
At the top of the screen, select .
For each result, the display provides the calculated result ( column), the raw RLU measurement
( column), with their relevant units and the messages. A comma displayed after the last message
indicates that all the messages cannot be shown in the column. A double-click on the line will open a window
containing the full list of messages. For assays performed in replicates (
column), the mean of the
measurements and of the results are displayed in bold, accompanied by each corresponding CV.
Results are displayed in the order of positions in the sample compartment. Other sorting criteria may be
selected for the display by using one of the following options:
The selected option is retained for printing also.
•
Click on to print the table.
•
To print out all the results of the work list, select “ Print results ” and click on .
Programming reflex tests
•
Open the relevant profile by double-clicking on the left part of the line, up to the «Analyte» column.
•
Click on to program the reflex tests.
The new analyse requests are added to the profile.
Comment: an analysis requested by a reflex test can be removed by unchecking the analysis.
•
Then click on .
Use
3-10- Results (continued)
IDS-iSYS User Manual - Revision M1
Use 3-10
88
Software version V 14