IDS IDS-iSYS, User Manual

Page: 194 / 263

•
For rinsing the D-SORB fluidic circuit, replace the D-SORB bottle with a bottle containing de-ionised water.
•
Identify the position by using the barcode label of the D-SORB bottle that just has been removed from the
system.
•
Request three times the priming SPECIFIC DECONTAMINATING SOLUTION, from the menu
•
For emptying the D-SORB fluidic circuit, remove the D-SORB level sensor from the bottle and wipe it.
•
Invert the D-SORB level sensor and keep it in the air.
•
Identify the position by using the barcode label of the D-SORB bottle that just has been removed from the
system.
•
Request three times the priming SPECIFIC DECONTAMINATING SOLUTION, from the menu
•
Empty the liquid waste
•
Empty the solid waste.
•
Waste must be disposed of in accordance with current local regulations (see APPENDIX I: Waste disposal,
page A2).
WARNING:
RISK OF BIOLOGICAL CONTAMINATION
Waste which contains, or has been in contact with, biological specimens must be
considered to pose a potential risk of infection.
Wear disposable gloves when handling waste.
The waste must be disposed of in accordance with current local regulations.
•
Click on .
•
Click on the liquid waste icon.
Then validate the message confirming the liquid waste emptying.
•
Click on the solid waste icon.
Then validate the message confirming the solid waste emptying.
•
Check the current volume of each ancillary reagent is adequate with the stop period.
•
From the File menu, click on EXIT, the software will close.
•
Then turn o ff the computer following the procedure for shutting down WINDOWS.
•
Finally, press the switch located on the left-hand side of the analyser into position ‘0’.
Appendices
IDS-iSYS User Manual - Revision M1
Appendix A-6
A 12
Software version V 14