ICP DAS USA UA-5200 Series, User Manual

Page: 173 / 233

UA-5200 Series User Manual V4.3 ICP DAS
173
The
“Module Content Setting” page after clicking the [Edit] button:
Convert Setting > OPC UA > Modbus RTU (Master)
– Module Content
No. The module number in the module list (Not editable here)
Module Name The module name set in the module list (Not editable here)
Convert Setting > OPC UA > Modbus RTU (Master)
– Variable Table
Name Display the variable name that set in the Modbus Address Mapping
Table page (Not editable here)
Attribute Display data attribute of the variable. (Not editable)
Include: Read, Read/Write
…
Data Type Display data type of the variable that set in the Modbus Address
Mapping Table page . (Not editable) Include: Bool, Short, Float
…
Enabled Check [Enabled] box of the top row can enable all variables in list.
Check the box of each variable can enable just that variable for
conversion. Default: Uncheck.
OK Click to save this page settings and back to the module list page.
When complete the setting, click [OK] to save this page settings and back to the module list
page. And remember to click [Save] to save the Convert Setting.