ICP DAS USA UA-5200 Series User Manual Download Page 165

Page: 165 / 233

UA-5200 Series User Manual V4.3 ICP DAS

165

7.4. MQTT Connection - Microsoft Azure Platform

Microsoft Azure Platform is a common platform to integrate IoT devices into the cloud.

Many of the applications use MQTT connection to the cloud for the setting is fast and easy.

The UA series also provides the MQTT function for module to connect to the Azure platform

and allows users to publish messages to Microsoft Azure and receive messages from

Microsoft Azure.

This page will introduce the settings for UA series controller using MQTT service to connect

to the Microsoft Azure Platform. It includes new, remove and set up the Azure list and the

function parameters

Summary of Contents for UA-5200 Series









































































































































































































































Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands

ICP DAS USA UA-5200 Series, User Manual

Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands