ICP DAS USA UA-5200 Series, User Manual

Page: 189 / 233

UA-5200 Series User Manual V4.3 ICP DAS
189
When entering the menu [Convert Setting] and the sub-menu [MQTT JSON] > Modbus
RTU or Modbus ASCII (Master), the Modbus RTU/ASCII modules preset in the [Module
Setting] will show up in the Module List. (Refer to Chapter 6 for the Module Setting.)
Convert Setting > MQTT JSON > Modbus RTU (Master) Module List
No. The module number in the module list (Not editable here)
*Module Name /
Nickname
The module name set in the module list (Not editable here)
Connection Name Select a group connection name, and then click [Apply].
All Enabled Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck. Check the box of each module
can enable just that module for conversion.
Edit If user wants to enable some I/O channels for conversion, click
[Edit] of that module to enter the
“Module Content Setting” and
“Variable Tale” page.
The page number of the module list: Current page / Total pages.
Click < or > to go to the previous or next page.
Save Click to save the settings of this page.
Click [Edit] button cauld enter the
“Module Content Setting” and “Variable Tale” page: